Renters face a specific problem: you want a wall-mounted TV, but you're not sure what your lease allows, and you don't want to lose your security deposit when you move out. This guide covers four mounting options for apartment renters, from zero-damage to minimal-damage, and explains exactly what the law says about holes in rental walls.

Check your lease first: Most standard residential leases permit "normal wear and tear," which includes small holes from hanging items. The key phrase to look for is any prohibition on drilling or mounting above a certain size. If your lease says nothing about it, the implied permission covers standard picture-hanging activities, which TV mounting resembles.

Option 1: TV Floor Stand (Zero Wall Contact)

Option 2: Minimal-Hole Wall Mount (Renter's Standard)

Standard Wall Mount with Stud Screws
Minimal Damage 4 Screw Holes Patchable on Move-Out

Standard TV mounting on drywall studs creates 4 screw holes, each about 3/16" diameter. This is comparable to hanging a large picture frame, a universally accepted activity in rental housing. When you move out, filling 4 small screw holes with spackling compound takes 15 minutes and $5 in materials, leaving no trace.

For this reason, most apartment renters who plan to stay at a location for more than 6 months choose standard wall mounting. The benefit (a clean, permanent TV position) outweighs the minor restoration work at move-out.

Pros

  • Cleanest look, TV truly flush to wall
  • Standard professional installation
  • Easy to restore on move-out

Cons

  • 4 screw holes in wall
  • Requires finding studs first
  • Some strict leases may prohibit

Apartment TV Mounting: We Handle Holes and Restoration

Our apartment mounting service includes stud location, careful installation, and optional move-out patching. Same-day available, fully insured.

Call (213) 556-4558

Option 3: No-Stud Wall Anchors (Landlord May Approve)

MOUNT2IT or SNAPTOGGLE Drywall Anchors
Larger Holes (up to 1") Up to 160 lbs Requires Patching

When studs aren't where you need them, metal toggle anchors work in the drywall itself. SNAPTOGGLE anchors require a 1" hole per anchor; MOUNT2IT anchors use a smaller 1/4" pilot hole. Both are patchable, but the 1" holes take more work than stud-screw holes. This approach is best when:

See our detailed guide on TV mounting without studs for anchor weight ratings and step-by-step installation.

Option 4: Freestanding Bookshelf / Entertainment Center

TV Stand with TV Arm or Elevated Shelf
Zero Wall Damage Traditional Look

An entertainment center with a built-in or add-on TV arm provides height adjustment and cable management without wall involvement. This works best for apartments where you want the TV at a specific height but furniture anchoring is acceptable or the floor stand look doesn't work for your layout.

Dedicated TV risers (like the IKEA Kallax series with a TV arm accessory) can elevate a TV to wall-mount height while keeping everything freestanding. The setup looks more furniture-like than a pure floor stand.

Know Your Rights: Holes vs. Damage in US Rental Law

US rental law in most states distinguishes between "normal wear and tear" (tenant not responsible) and "damage" (tenant responsible). Small holes from TV mounting generally fall into normal wear and tear, similar to:

Large holes (1" diameter from toggle bolts), unpainted patches, or multiple holes on a single wall area could be classified as damage in some jurisdictions. The safe practice is to patch all holes before the move-out inspection, using matching paint if possible.

Concrete and masonry walls: Some newer apartment buildings have concrete walls (common in high-rises). Drilling concrete requires a hammer drill and masonry bits, the process creates larger holes and more dust. If your apartment has concrete walls, a floor stand is usually the better choice for renters, as the patching process is significantly more involved than drywall.

How to Patch TV Mount Holes Before Moving Out

Small screw holes (3/16"–1/4")

  1. Remove all screws and anchors from the wall
  2. Fill each hole with pre-mixed lightweight spackle using a putty knife
  3. Smooth flush with the wall surface and let dry 1–2 hours
  4. Sand smooth with 120-grit sandpaper
  5. Touch up with matching wall paint (a small foam roller gives the best texture match)

Larger toggle bolt holes (up to 1")

  1. Cut a small square patch of drywall slightly larger than the hole, or use a mesh patch kit
  2. Apply joint compound in two thin coats (let each coat dry completely)
  3. Sand smooth, prime the patch area, then paint
  4. Feather the paint out 12"–18" to blend with the existing wall color

Professional patching service for TV mount holes typically costs $50–$150 and virtually guarantees no security deposit deduction related to the holes.

Professional Apartment Mounting: Move-Out Patch Service Available

We mount your TV correctly the first time and offer a return visit patching service when you move out. Starting at $55 for standard drywall.

Get a Free Quote

Frequently Asked Questions

Can you mount a TV in a rented apartment?

Yes, in most cases. The question is which method to use. Many apartments allow small-hole TV mounting (the holes from mounting screws are no different from hanging picture frames, which most leases permit). If your lease explicitly prohibits drilling, use a TV floor stand, it requires no wall contact at all and achieves the same mounted appearance. Check your specific lease language before drilling; most standard residential leases allow normal picture-hanging activities.

Can a landlord charge you for TV mount holes?

A landlord can charge for damage that goes beyond "normal wear and tear." Small holes from TV mounting screws (3/16" to 1/2" diameter) typically fall under normal wear and tear in most US states, similar to nail holes from picture frames. Large holes from toggle bolts (up to 1" diameter) may be charged. However, if you patch and paint small holes before move-out, there is typically no charge. Using a professional patching service costs $50–$150 and virtually eliminates the chance of a security deposit deduction.

What is the best no-drill TV mounting option for apartments?

A TV floor stand is the most versatile no-drill option. Quality stands like Perlegear and Mounting Dream hold 32"–86" TVs up to 110–132 lbs with zero wall contact. The TV sits 6–8" from the wall with a base about 24" wide, most viewers don't notice it in normal use. The main advantage over wall mounting: fully portable and leaves zero evidence of ever having a TV in that spot.

How do I patch TV mount holes before moving out?

For screw holes (3/16" diameter): fill with spackling compound, let dry 1–2 hours, sand smooth, touch up with matching wall paint. Total cost: $5–$10. For larger toggle bolt holes (up to 1"): use pre-mixed lightweight spackle, apply in two thin coats, sand, prime, and paint. If the wall color is tricky to match, buy a small amount of the original paint from your landlord or take a paint chip to a hardware store for matching. Done properly, the patches are invisible.