About Our Albuquerque Service
Mounting a TV above a fireplace in Albuquerque requires careful planning for heat management and wall structure. Albuquerque homes range from older masonry fireplaces to modern gas insert units, we handle all types daily throughout Downtown, Old Town, and Nob Hill.
Heat is the main concern: we use a minimum 12-inch gap above the fireplace opening and measure actual heat output with a thermal gun before drilling. For wood-burning fireplaces, we often recommend a pull-down mount (MantleMount or similar) so the screen tilts toward eye level.
Fireplace Types We Mount In Albuquerque
- Gas insert fireplaces with drywall surrounds: newer Rio Rancho, Westside and Mesa del Sol builds usually have a gas insert in a framed drywall chase. On Westside and Rio Rancho builds the lags bite into the studs framing the chase, and the gas valve, glass and flue cap stay as the builder left them.
- Standard brick fireplaces: older Nob Hill and Ridgecrest homes from the '40s and '50s often have a brick fireplace. In Nob Hill and Ridgecrest a carbide bit seats every sleeve anchor in the face of a brick, and the old joints carry nothing.
- Stone fireplace surrounds: flagstone and river-rock fireplaces in the Northeast Heights and Sandia Heights get anchors in the soundest stones, with the plate shimmed so the TV hangs level.
- Stucco or plaster surrounds: kiva fireplaces and stucco or plaster surrounds over adobe are common in Old Town, the North Valley and Corrales; we find the adobe or framing behind before drilling.
Pricing in Albuquerque
| Service | Price |
|---|---|
| Above-fireplace mounting, 32"–59" TV | from $218 |
| Above-fireplace mounting, 60"+ TV | from $238 |
| Brick or stone fireplace wall | +$69 |
| In-wall wiring above the fireplace | +$149 |
| Pull-down / MantelMount-style mount | custom quote |
Get an Exact Quote for Your Albuquerque Home
Answer 3 quick questions, we'll text you a price in under 2 minutes.
Call (505) 362-5599Service Areas in Albuquerque
Frequently Asked Questions
How high above a fireplace should a TV be mounted in Albuquerque?
Burque winters bring piñon fires that run hot, so a foot over the firebox is our floor and many walls get more. Albuquerque fireplaces get real use on cold desert nights, and piñon fires run hot, so we light yours, read the wall at the planned height with an infrared thermometer, and adjust. If the set has to sit near the vigas, a drop-down arm brings it to sofa level for a Lobos game.
Can you mount a TV above a brick fireplace in Albuquerque?
Yes, we mount TVs above brick fireplaces throughout Albuquerque, including Nob Hill, the Heights and older Ridgecrest ranches. Carbide goes into solid brick with a shop-vac hose catching the dust, never into the joints, and every sleeve anchor holds several times the TV's weight.
Does Albuquerque weather affect TV mounting above a fireplace?
Dry air and strong sun don't reach an indoor mount, but kiva fireplaces and adobe walls do change the job. Adobe needs long anchors or a backing board, and a corner kiva usually means a corner or side-wall mount. We check the heat and the wall before choosing.
How much does fireplace TV mounting cost in Albuquerque?
TV mounting above a fireplace in Albuquerque starts at $218 for a 32–59 inch TV ($169 plus the $49 fireplace add-on) and $238 for 60 inches and up. Brick, stone or adobe adds $69, and in-chase wiring adds $149. Run the quiz and the Albuquerque price for your mantel appears before anyone leaves the shop.
Do you serve all Albuquerque neighborhoods for fireplace TV mounting?
Yes, we serve all Albuquerque-area neighborhoods, including Downtown, Old Town, Nob Hill, the Northeast Heights, Sandia Heights, the North Valley and the Westside, plus Rio Rancho, Corrales and Los Ranchos. Mantel jobs from the North Valley to the Heights can often be done that afternoon.
Mounting a TV Above a Fireplace in Albuquerque Homes
Can you mount a TV above a kiva or stucco fireplace?
Yes. Kiva and beehive fireplaces in Pueblo-style homes are built from adobe or block under plaster, so we find solid masonry behind the finish and use masonry anchors (+$69). Hollow plaster alone never carries the mount.
Above-fireplace TV mount near me in the Northeast Heights or Rio Rancho?
Both are regular stops. Newer Rio Rancho and Westside builds usually have a drywall chase over a gas insert, which is the quickest install. Older Heights homes more often have brick or block.
What does it cost to put a 65-inch TV over a fireplace?
$238 on a standard drywall chase ($189 plus the $49 fireplace add-on). On brick, block or adobe it is $307. A tilting mount adds $79 when you need us to supply one.
Will the heat from a wood-burning fireplace hurt the TV?
It can if the screen hangs low. We check the surface temperature at the planned height and keep at least 12 inches above the opening. A mantel or a tilting mount makes a high screen easier to watch.
Fireplace TV Mounting in Albuquerque
From kiva corners to tall stone hearths, fireplaces here come in shapes that change the mount. Example projects:
Tilting 65-inch over a stucco hearth in the Northeast Heights
A tilting mount anchored into the framing behind the stucco surround, set as low as the mantle allows and angled down toward the room.
Kiva corner with a swing arm in Los Ranchos
When the fireplace is a rounded kiva, the screen goes on the neighbouring flat wall with an arm long enough to aim toward the hearth.
Kiva and stucco fireplaces
Kiva fireplaces have curved plaster faces with no flat area above, and many are wood-burning. We check heat, surface shape and what is behind the plaster before suggesting a spot.
Albuquerque Fireplace Installs, Step by Step
A 65" over a gas fireplace in Rio Rancho
A Rio Rancho family room with a framed chase above a gas insert. The installer arrived 40 minutes after booking, read the heat and dropped the cable inside the chase.
The 65-inch is centered on the mantel, and the cable ends in a plate beside the hearth.
A 55" beside a kiva in Corrales
The installer came at 2 p.m. as booked to a Corrales adobe with a beehive fireplace. He drilled the adobe without hammer mode and used long anchors set deep into the mud brick beside the fireplace, then tested the bracket by hand before hanging the 55-inch.
Customer Reviews
Evan was awesome he did a fast and efficient job. he asked questions and made sure it was exactly how we wanted.
Evan was fast very efficient and reasonably priced
Evan was a great help and performed a very fast and effective install. He was nice and friendly too made sure everything was perfect.
Technician was polite and worked very fast
Evan was very friendly, professional, and did an excellent job. If I ever need services in the future, I know exactly whom I'd call. Thanks for the awesome job, Evan!!! Edit: Also, I was very appreciative he was willing to work around my schedule as I only had Sunday available.

















