About Our Baltimore Service
Baltimore homeowners care about clean interiors, dangling TV cables are the first thing guests notice. We route them invisibly throughout Inner Harbor, Fells Point, and Canton.
Baltimore's mix of construction types affects the approach. Older homes in Inner Harbor often have plaster walls or older drywall with inconsistent stud spacing. Newer construction in Federal Hill and Towson uses standard 16-inch OC framing, making in-wall routing straightforward.
Wire Concealment Methods for Baltimore Homes
- In-wall routing with recessed outlet: suburban homes in Columbia, Towson and Catonsville have open stud bays, so HDMI and power run inside the wall to a recessed plate behind the TV.
- Cord cover raceways: Harbor East and Mount Vernon apartments usually forbid cutting, so a paintable raceway carries the cords and gets painted to the wall color.
- In-wall routing above fireplace: after a scan finds the flue, the wires drop down the framed chase beside it to an outlet near the mantel. From $149.
- Baseboard channel routing: rowhouse party walls are solid brick, so cables there run in a low painted channel or through a framed partition on the opposite wall.
Pricing in Baltimore
| Service | Price |
|---|---|
| Cord cover raceway (no drywall work) | +$69 |
| In-wall concealment with recessed power outlet | +$99 |
| In-wall routing above a fireplace | +$149 |
| TV mounting 32"–59" + in-wall wiring | from $268 |
| TV mounting 60"+ + in-wall wiring | from $288 |
Get an Exact Quote for Your Baltimore Home
Answer 3 quick questions, we'll text you a price in under 2 minutes.
Call (410) 567-4321Service Areas in Baltimore
Frequently Asked Questions
Can you hide TV wires in my Baltimore home without cutting the wall?
Yes. A paintable raceway hides the cords with no cutting at all, which most Baltimore renters and many rowhouse owners prefer. We paint it to match before we leave, and it comes off at move-out leaving only small screw holes.
How much does TV wire concealment cost in Baltimore?
TV wire concealment in Baltimore starts at $69 for a paintable cord cover. In-wall routing with a recessed power outlet is $99 on a standard wall, and $149 when the cables run above a fireplace. The quiz shows which one you need.
Do you need to cut drywall to hide TV wires in Baltimore?
Only for in-wall routing. That's one small opening behind the screen and another down by the receptacle, both trimmed with recessed plates. Rowhouse plaster gets scored first so it doesn't crack, and our vacuum catches the dust.
Can you hide wires on a brick or stone wall in Baltimore?
The brick party walls in Canton and Federal Hill rowhouses won't take a fish tape, so a slim channel follows a mortar joint or the corner, painted to vanish. When a basement sits right under the wall, the cord can come up through the floor instead.
Do you serve all Baltimore areas for wire concealment?
Yes. We hide TV wires across the Baltimore area, including Canton, Fells Point, Federal Hill, Hampden, Mount Vernon, Towson, Catonsville, Columbia and Glen Burnie. Book before noon and wire jobs from Hampden to Highlandtown are often finished that day.
Cord Concealment Jobs Around Baltimore
Hiding cables is one of the most common add-ons we do between Elkridge and Gambrills. Three examples, two in-wall and one with surface channels:
Two swivel TVs with in-wall runs in Gambrills
Two 50" sets on full-motion arms, each with power and HDMI fed inside the wall. Swivel arms need a little slack in the cable so the TV can move without tugging, which we leave inside the recessed box.
Paintable cord channels for two 50" TVs in Severn
Where opening the wall is not an option, a surface raceway painted to match is the next best thing. Both runs were cut to length and set straight down to the outlets so they read as trim rather than cables.
Fixed 55" with hidden wiring in Elkridge
A slim fixed mount and an in-wall run is the cleanest possible combination: the TV sits flush, and there is nothing below it but paint. We check the stud bay for insulation and blocking before cutting the lower opening.
Hidden-Wire Jobs in Baltimore
A 75" with the cable hidden by two installers
An apartment where management allowed a small opening. Two installers arrived 35 minutes after booking.
The sensor found the plumbing stack in the first bay, so the run went one bay over.
Both installers lifted the 75-inch onto a flat bracket across two studs. The cable drops to a brush plate by the console, and the opening was cut to the exact size of the plate, so no patching was needed.
An old TV out and a 40" in with a cord cover
A Hampden rowhouse with plaster walls. The installer parked on the narrow Hampden street and arrived at 3 p.m. as booked. The old TV came off a plaster wall where its anchors had been set into lath alone and were pulling loose. He found the studs by the lath nails with a magnet, put the 40-inch's bracket into two of them and ran a painted raceway along the old baseboard to the outlet.
Customer Reviews
Thanks a lot Evan!
Evan is awesome to work with! Great communication and excellent installation. Thanks Evan!
Evan and Anthony were surpurb -helpful and professional in every way !
Evan did an amazing job mounting both TV in the shortest time possible.
Evan




