About Our Dallas Service
Dallas homeowners care about clean interiors, dangling TV cables are the first thing guests notice. We route them invisibly throughout Uptown, Deep Ellum, and Knox-Henderson.
Dallas's mix of construction types affects the approach. Older homes in Uptown often have plaster walls or older drywall with inconsistent stud spacing. Newer construction in Frisco and McKinney uses standard 16-inch OC framing, making in-wall routing straightforward.
Wire Concealment Methods for Dallas Homes
- In-wall routing with recessed outlet: cables inside the wall to a recessed plate; most North Texas homes have open stud bays.
- Cord cover raceways: Uptown, Deep Ellum and Bishop Arts apartments rarely allow cutting, so a painted raceway carries the cords along the wall instead.
- In-wall routing above fireplace: after a scanner locates the flue, both leads are fished down the framed chase beside it to a plate near the mantel. $149.
- Baseboard channel routing: older East Dallas homes sit on pier and beam, so cables can run under the floor instead of through a lower opening.
Pricing in Dallas
| Service | Price |
|---|---|
| Cord cover raceway (no drywall work) | +$69 |
| In-wall concealment with recessed power outlet | +$99 |
| In-wall routing above a fireplace | +$149 |
| TV mounting 32"–59" + in-wall wiring | from $268 |
| TV mounting 60"+ + in-wall wiring | from $288 |
Get an Exact Quote for Your Dallas Home
Answer 3 quick questions, we'll text you a price in under 2 minutes.
Call +1 (972) 913-6466Service Areas in Dallas
Frequently Asked Questions
Can you hide TV wires in my Dallas home without cutting the wall?
Yes. A paintable raceway hides the cords without cutting, and most Dallas leases and HOAs allow it. Our tech paints the cover to match on site, and it unscrews at move-out leaving pinholes a dab of spackle covers.
How much does TV wire concealment cost in Dallas?
Cord covers are $69 in Dallas, in-wall routing with a recessed power outlet is $99 on a standard wall, and $149 above a fireplace. Our quiz recommends a route for your Dallas wall and prices it.
Do you need to cut drywall to hide TV wires in Dallas?
Two plate-size openings for in-wall routing, one behind the TV and one near the outlet. In pier-and-beam houses in Lakewood and the M Streets we often need just one, because the cable comes up through the floor. A vacuum takes the dust.
Can you hide wires on a brick or stone wall in Dallas?
Brick and Austin stone can't be fished like drywall, so a slim painted raceway runs beside them, along a joint or the wall edge. In M Streets and Lakewood houses on pier and beam, the cord can often run under the floor and come up beside the brick.
Do you serve all Dallas areas for wire concealment?
Yes, from Uptown, Lakewood and Oak Cliff to Richardson, Plano, Frisco, McKinney, Garland and Rockwall. Same-day wire jobs are common across the Dallas side of the Metroplex when you call in the morning.
Dallas Homes Where We Hid the Cables
Hanging the screen takes minutes; making the cords vanish is the part people notice afterward. These Dallas-area jobs went fully in-wall.
Three TVs, three hidden runs on a Quinlan property
A 75-inch living-room set plus two 40-inch screens in other rooms, and the owner wanted no cords on any of them. Each wall got a recessed plate behind the TV and a second near the outlet, with power and signal pulled through the cavity between.
In-wall power and HDMI in far North Dallas
A single 65-inch screen and a strict "nothing visible" brief. We fished the cables between two studs, fitted a recessed power kit so the plug sits flush behind the panel, and patched nothing, the plates cover both openings.
Three 75-inch screens in Lewisville, two with concealed wiring
Three matching 75s across the house. Two of the walls were clear interior drywall, ideal for routing cables inside; the third sat where an in-wall run made little sense, so that one stayed with neatly dressed cords.
Exterior walls and fire blocking in DFW homes
In-wall routing works best on interior walls. Exterior walls in DFW are usually insulated, and some homes have horizontal fire blocking between studs, which can force a raceway or a small extra opening. We check with a stud finder and a borescope before cutting.
Hidden-Wire Jobs in Dallas
Two TVs with hidden cables in an Irving apartment
An Irving apartment where the management allowed small openings for in-wall wiring. The 65-inch went in the living room and the 40-inch in the bedroom.
The technician arrived 35 minutes after booking. Apartment walls often hide plumbing stacks, and the scanner found one in the living-room wall. The in-wall run went one bay over, and the bracket stayed centered thanks to its lateral slide.
Each opening was cut to exactly the size of the recessed plate, so no patching was needed. Both TVs were tested, and the technician noted the hole positions for move-out.
Wires run under the floor of a pier-and-beam house in East Dallas
A 1930s Lakewood bungalow on a pier-and-beam foundation, with plaster walls. The owner wanted no visible cords and no cuts at the bottom of the wall.
The technician arrived 50 minutes after the call. Pier-and-beam houses have a crawl space, so instead of a lower wall opening he drilled up through the bottom plate from below and ran the cable under the floor to the media cabinet. He checked the crawl space for wiring and gas lines before drilling.
The TV went into studs found by magnet and pilot hole, and the plaster dust was vacuumed.
Customer Reviews
Evan did a great job . In no time
Ivan was great! Prompt, punctual and polite! He was in and out with the job done neat and cleanly in about 20 minutes, would highly recommended!
Ivan was great. Super friendly, professional, hard working, and installed two TV’s quickly. It’s also my second time using this company to install TV’s and they are the best. Thank you 🤩
Super reliable and great work done .
Perfect hanging! Evan did sooooo good ! Came ready and prepared out in no time ! LOVED everything about his services




