📍 Los Angeles, CA
+1 (213) 556-4558 CALL NOW
TV mounting service in Los Angeles

TV Mounting Above Fireplace in Los Angeles, CA

Heat-Safe TV Installation for Los Angeles Fireplaces

✓ Licensed & Insured ✓ Same-Day Available ✓ 5-Star Rated ✓ Satisfaction Guaranteed

About Our Los Angeles Service

Mounting a TV above a fireplace in Los Angeles requires careful planning for heat management and wall structure. Los Angeles homes range from older masonry fireplaces to modern gas insert units, we handle all types daily throughout Santa Monica, Venice, and Culver City.

Heat is the main concern: we use a minimum 12-inch gap above the fireplace opening and measure actual heat output with a thermal gun before drilling. For wood-burning fireplaces, we often recommend a pull-down mount (MantleMount or similar) so the screen tilts toward eye level.

Fireplace Types We Mount In Los Angeles

  • Gas insert fireplaces with drywall surrounds: typical in Irvine, Valencia and other planned communities: a gas insert in a framed chase, where the bracket lags into two studs.
  • Standard brick fireplaces: older Pasadena and Valley ranches often have red brick; we drill the brick faces and set sleeve anchors.
  • Stone fireplace surrounds: ledgestone and river rock are common in Calabasas and the canyons. Sleeve anchors bite into sound river rock or the block core behind a Spanish-revival hearth, and shims bring the plate dead flat.
  • Stucco or plaster surrounds: Spanish-style homes in Los Feliz and Silver Lake have smooth plaster or tile; we find the framing first and drill tile with a diamond bit.

Pricing in Los Angeles

ServicePrice
Above-fireplace mounting, 32"–59" TVfrom $218
Above-fireplace mounting, 60"+ TVfrom $238
Brick or stone fireplace wall+$69
In-wall wiring above the fireplace+$149
Pull-down / MantelMount-style mountcustom quote

Get an Exact Quote for Your Los Angeles Home

Answer 3 quick questions, we'll text you a price in under 2 minutes.

Call +1 (213) 556-4558

Service Areas in Los Angeles

Santa Monica Venice Culver City West Hollywood Brentwood Pasadena Glendale Burbank Sherman Oaks Studio City Encino Long Beach

Recent Work Photos

TV mounting work photoTV mounting work photoTV mounting work photoTV mounting work photoTV mounting work photoTV mounting work photoTV mounting work photoTV mounting work photoTV mounting work photoTV mounting work photoTV mounting work photoTV mounting work photoTV mounting work photoTV mounting work photoTV mounting work photoTV mounting work photoTV mounting work photo

More photos on Yelp →

Frequently Asked Questions

How high above a fireplace should a TV be mounted in Los Angeles?

Keep a foot or more between the firebox and the bezel, and add space for a gas insert a Pasadena family runs through every rainy February. We check the wall with an infrared thermometer while the fireplace runs. For tall mantels in Valley great rooms, a pull-down mount brings the screen down to eye level.

Can you mount a TV above a brick fireplace in Los Angeles?

Yes. Brick fireplaces are common in 1950s Valley and San Gabriel ranches. We drill the brick faces with a vacuum at the bit and set anchors rated for the TV, and in earthquake country we never rely on a single anchor point.

Does Los Angeles weather affect TV mounting above a fireplace?

LA weather isn't the issue; earthquakes and heat are. We lag into two studs or set masonry anchors sized for the TV, and check the heat above the firebox before choosing a height.

How much does fireplace TV mounting cost in Los Angeles?

A 32–59 inch TV over a fireplace is $218 and 60 inches and up is $238. Stone, brick or tile adds $69, and hiding the cables in the chase adds $149. The quiz gives an exact LA price.

Do you serve all Los Angeles neighborhoods for fireplace TV mounting?

Yes, from Santa Monica and the Westside to the Valley, the San Gabriel Valley, the South Bay and Long Beach, including Silver Lake, Los Feliz, Pasadena, Sherman Oaks, Encino, Manhattan Beach and Orange County. Call before lunch and a Los Feliz or Encino mantel often has its screen by evening.

Above-Fireplace TV Mounting Across Los Angeles and Orange County

TV over the fireplace near me in Irvine, Huntington Beach or the Valley?

Yes, those are among our most frequent fireplace addresses in Southern California. Most have a gas fireplace in a drywall chase or a tile or stone surround.

Mounting on a tile or stone fireplace

We drill tile with diamond bits to avoid cracking, then anchor into solid material behind it. Stone and masonry add $69.

Older Spanish-style or Craftsman fireplace?

These often have plaster over brick. We drill to the brick and use masonry anchors. A 65-inch over brick is $307.

Earthquake-safe fireplace mount?

We use lag bolts into studs or masonry anchors into brick, sized for the TV weight. Price with hidden wires on a framed chase: $387 for a 65-inch.

Fireplace TV Installs Around Los Angeles

Southern California fireplaces are mostly decorative gas units, which keeps heat manageable, the real challenge is usually the surround: marble, stacked stone or old brick.

65" over a marble surround in Canoga Park, pre-run wiring used

  • Shoup Ave, Canoga Park
  • Standard price: $585

The homeowner had already prepared the wall for in-wall cabling, so we tied our run into that path and finished with recessed plates. Drilling marble calls for a diamond bit and patience; the owner also considered a tilt option for a lower viewing angle.

70" on an articulating arm above the hearth in Monrovia

  • W Maple Ave, Monrovia
  • Standard price: $426

A full-motion arm over a fireplace can pull the screen down and out toward the room, which helps when the mantle sits high. Power and HDMI travel inside the wall, so nothing dangles between the TV and the firebox.

Stone fireplace in Venice with a surface raceway and our soundbar bracket

  • Penmar Ave, Venice
  • Standard price: $455

Stacked stone cannot hide a cable inside it, so the wiring ran in a slim raceway painted to blend with the wall. A 65" went above the firebox, and we supplied the soundbar mount so the speaker lines up exactly with the screen.

Fireplaces in LA homes

Most fireplaces we see here are gas inserts with stone, tile or marble surrounds. We check temperature above the mantle, look for a stud or header above the firebox, and prefer tilting or pull-down mounts when the mantle pushes the screen above eye level.

Los Angeles Fireplace Installs, Step by Step

65" over a marble fireplace in Canoga Park

  • Canoga Park
  • 65" · marble surround · tilting mount · in-wall run (pre-prepared)
  • Standard price: $535

The owner had already had an electrician add a recessed outlet behind where the TV would go, so the in-wall part was half done. What was left was mounting through a polished marble slab without chipping it.

This was a scheduled morning visit, and the technician arrived at 8:10 for an 8–10 window. The technician masked the drill points with painter's tape, started each hole with a diamond bit at low speed and fed water to keep the stone cool, then switched to a masonry bit for the block behind the slab. A helper held the vacuum nozzle at every hole. Before drilling, he checked the wall temperature above the firebox and confirmed the bottom of the screen would sit more than 12 inches above the opening.

The tilting mount angles the 65-inch about 10 degrees down toward the sofa. The low-voltage cable was fished from the existing opening to the media cabinet, the TV was tested, and the marble was wiped down.

65" over a stone fireplace with a soundbar in Venice

  • Venice
  • 65" · stacked stone · soundbar · cord cover
  • Standard price: $455

A beach bungalow with a stacked-stone fireplace that ran to the ceiling. The owner wanted the TV and a soundbar on the stone. The stone face was too uneven for a stock bracket to sit flat.

The technician reached Venice 55 minutes after booking, with the westside traffic. The technician found the flattest section with a straightedge, drilled into solid stone with a hammer drill and set wedge anchors. He shimmed the bracket with stainless washers until the level read zero. The soundbar went just above the mantel shelf on its own bracket.

Running wires inside a stone chimney isn't possible, so a paintable cord cover was run down the side where the stone meets the drywall and colored to match the trim. Sound and picture were tested, and the stone dust was swept and vacuumed out of the grout lines.

The customer asked about running the wires inside the chimney. The technician explained why that's not possible with stone: the chimney is solid masonry with a flue inside, and cutting a channel would risk the stone and the flue. The cord cover was the clean alternative.

He tested the soundbar from the sofa and adjusted the TV's audio sync, because the bar sat close to the stone and sounded boomy. A setting change fixed it.

Customer Reviews

T Guarna, verified TV mounting customer
T Guarna
28 days ago

Good experience

Jill Minehan, verified TV mounting customer
Jill Minehan
28 days ago

Evan was great! Professional and efficient! We had a very large tv and a complex mounting system and it was up and ready within an hour. Would highly recommend!

Benjamin Antunes, verified TV mounting customer
Benjamin Antunes
29 days ago

Excellent service and quick install!

Benjamin Antunes's TV mounting result
Vonn Johnson, verified TV mounting customer
Vonn Johnson
29 days ago

Super fast, was able to dismount the tv flawlessly in under 10m.

Jorea Fleurant, verified TV mounting customer
Jorea Fleurant
1 months ago

Alex was great he went over and beyond to mount out TVs, when another company claimed it couldn't be done. I appreciate the hard work and it went well..Thank you Alex will book again..

Book Your Fireplace TV Installation in Los Angeles

We respond within 15 minutes during business hours.

✓ Request received! We'll text you shortly.