About Our Portland Service
Mounting a TV above a fireplace in Portland requires careful planning for heat management and wall structure. Portland homes range from older masonry fireplaces to modern gas insert units, we handle all types daily throughout Pearl District, Alberta Arts District, and Hawthorne.
Heat is the main concern: we use a minimum 12-inch gap above the fireplace opening and measure actual heat output with a thermal gun before drilling. For wood-burning fireplaces, we often recommend a pull-down mount (MantleMount or similar) so the screen tilts toward eye level.
Fireplace Types We Mount In Portland
- Gas insert fireplaces with drywall surrounds: newer homes in Happy Valley, Tigard and Camas usually have a gas insert in a framed chase, so the bracket lags into two Douglas fir studs and the cable can drop inside.
- Standard brick fireplaces: 1950s ranches in Gresham and Beaverton often have red-brick fireplaces; anchors go into the brick faces, never the joints.
- Stone fireplace surrounds: river-rock and stacked-stone fireplaces show up in West Hills and Lake Oswego homes; we anchor into solid stone and shim the bracket flat.
- Stucco or plaster surrounds: Craftsman bungalows in Sellwood and Laurelhurst have tile or plaster over brick around the firebox; tile gets a diamond bit, then anchors into the brick behind.
Pricing in Portland
| Service | Price |
|---|---|
| Above-fireplace mounting, 32"–59" TV | from $218 |
| Above-fireplace mounting, 60"+ TV | from $238 |
| Brick or stone fireplace wall | +$69 |
| In-wall wiring above the fireplace | +$149 |
| Pull-down / MantelMount-style mount | custom quote |
Get an Exact Quote for Your Portland Home
Answer 3 quick questions, we'll text you a price in under 2 minutes.
Call +1 (971) 380-5323Service Areas in Portland
Frequently Asked Questions
How high above a fireplace should a TV be mounted in Portland?
Keep the bottom of the TV at least 12 inches above the firebox, more if the wall runs hot. Portland houses burn wood stoves and inserts for much of the year, and wood stoves throw more heat than gas, so we read the wall temperature with the fire going before setting the height.
Can you mount a TV above a brick fireplace in Portland?
Yes. Brick fireplaces are common in postwar Portland ranches. We drill the brick faces with a hammer drill and a vacuum at each hole and set sleeve anchors rated for the TV; the old lime mortar is too soft to hold a bracket.
Does Portland weather affect TV mounting above a fireplace?
The rain doesn't reach an indoor mount, but earthquakes and wood-stove heat do matter. Every bracket goes on two studs or solid masonry, and we keep the screen above the hottest air.
How much does fireplace TV mounting cost in Portland?
A 32–59 inch TV over a fireplace is $218, and 60 inches and up is $238. Stone, brick or tile adds $69, and hiding the cables inside the chase adds $149. The quiz gives an exact Portland price in two minutes.
Do you serve all Portland neighborhoods for fireplace TV mounting?
Yes, across Portland, Beaverton, Hillsboro, Tigard, Lake Oswego, West Linn, Gresham and Happy Valley, plus Vancouver and Camas across the river, from Irvington and Laurelhurst to Sellwood and the West Hills. Ring before lunch and a mantel in Laurelhurst or Lake Oswego often has its screen by evening.
TV Above the Fireplace in Portland and Vancouver
Fireplace TV mounting near me in Beaverton, Tigard or Lake Oswego?
Yes, those are frequent fireplace addresses for us. Most homes have a gas insert in a brick or drywall surround.
Vancouver, WA too?
Yes, Vancouver and Clark County are regular stops.
Older brick fireplace in Southeast Portland?
We drill into the brick with carbide bits and use masonry anchors (+$69). A 65-inch over brick is $307.
Price with hidden wires
A 65-inch over a framed chase with in-wall wiring is $387: $189 for the TV, $49 for the fireplace and $149 for the wiring.
Fireplace TV Installs in Portland Homes
From Southwest hillside houses to West Linn cul-de-sacs, the fireplace wall is often the only wall the couch faces. Three recent installs:
SW Portland: 65" on an articulating mount above the fireplace
The articulating arm lets the screen drop toward the seating instead of hanging high and flat. We anchored into the framing over the firebox and checked clearance to the mantle at full tilt.
West Linn mantle with a 65" above it
A clean drywall chimney chase made the anchoring simple. The decision that mattered was height: we set the bottom of the TV a few inches above the mantle lip to keep the screen as low as safely possible.
NE Portland: 65" above a fireplace, mounted by a pair
A full-motion arm above a narrow mantle, which means the lift has to happen over the mantle shelf. Two technicians kept the panel off the mantle entirely while the arm was locked in.
Older Portland fireplaces
Many pre-war Portland homes have brick chimneys running up the inside wall, often with plaster over the brick. We test what is behind the surface before choosing anchors, and heat-check wood-burning fireplaces before recommending a height.
Portland Fireplace Installs, Step by Step
A 65" arm on a brick fireplace in Gresham
A 1970s Gresham ranch with a red-brick fireplace and a wood stove insert. The owner wanted the 65-inch on an arm over it and asked whether the cable could go inside.
The installer arrived 45 minutes after booking. Wood stoves throw far more heat than gas inserts, so the thermometer reading came first. It ran hot near the mantel, so the screen went higher than the owner first pictured, and the arm brings it down and forward when watching.
The brick ran all the way up, so there was no hollow chase to fish. He explained that and ran a slim cover down the side instead, painted brick-red. Sleeve anchors went into the brick faces with a vacuum held at each hole.
An 85" replacing a 65" over the fireplace in Tigard
The 65-inch over the fireplace came down and an 85-inch took its place. The 65-inch moved to the den on a fixed bracket.
Two installers arrived at the start of the booked window. The old fireplace bracket wasn't rated for 85 inches, so it was replaced. They lifted the new panel flat between them.
Customer Reviews
Ivan did a great job!
Evan came to install a tv mount we were having issues with installing and within 30 mins he had it up and installed and it looks great! I couldn’t recommend this company enough and will have them back to install another real soon!
Evan was awesome! Very friendly, quick and professional. Would definitely use his services again.
They were fast and did a fantastic job. They both were nice and attentive to putting my three TVs up especially the 75”. I will be using them again for my other room.
Very fast!

















