About Our Washington DC Service
Apartment TV mounting in Washington DC requires extra care, minimal wall damage, clean hole patching, and sometimes no-stud alternatives for concrete or masonry walls. We work with renters throughout Capitol Hill, Georgetown, and Bethesda to get a clean installation that meets lease requirements.
Washington DC's apartment landscape ranges from older drywall units in Capitol Hill to concrete-walled high-rises in Georgetown and new-construction units in Bethesda and Arlington VA. Each wall type requires a different approach to minimize damage.
Apartment Wall Types in Washington DC
- Standard drywall with studs: wood-framed garden apartments in Arlington, Alexandria and Silver Spring take two lags into the studs and leave small holes.
- Concrete or CMU block walls: concrete walls in Arlington, Navy Yard and Silver Spring towers get wedge anchors after a scan for rebar and conduit.
- Thin partition walls: steel studs in newer Navy Yard and NoMa buildings need toggle anchors rated for steel framing.
- Cord cover raceways (no-drill option): leases that forbid opening walls get a slim adhesive cover, painted on site, that peels off without marks.
Pricing in Washington DC
| Service | Price |
|---|---|
| TV up to 31" | from $55 |
| TV 32"–59" | from $169 |
| TV 60"+ | from $189 |
| Concrete or brick wall | +$69 |
| Cord cover raceway (no wall cutting) | +$69 |
| Mount supplied: fixed / tilting / full-motion | +$69 / +$79 / +$89 |
Get an Exact Quote for Your Washington DC Home
Answer 3 quick questions, we'll text you a price in under 2 minutes.
Call +1 (240) 554-5615Service Areas in Washington DC
Frequently Asked Questions
Can you mount a TV in my Washington DC apartment?
Yes. We photograph the holes for your move-out, use the smallest hardware that holds safely, and handle the COI and elevator booking with your building. We mount TVs in DC-area apartments every week.
Will mounting a TV damage my Washington DC apartment wall?
A standard bracket means four tiny screw holes, and those vanish under filler well before your Adams Morgan walkthrough. Rental plaster stays uncut by default; cables tuck into a channel brushed in your wall color, which most DC management companies allow.
Can you mount a TV on a concrete wall in my Washington DC apartment?
Yes; we image the slab for steel and electrical lines first, which matters in Wharf and NoMa high-rises. Buildings in Navy Yard, NoMa, Arlington and Silver Spring usually want a COI, which we send before the visit, and we book the freight elevator if needed. Wedge anchors go only in clear spots, and a concrete wall adds $69.
How much does apartment TV mounting cost in Washington DC?
Apartment TV mounting in the DC area is $169 for 32–59 inch TVs and $55 for TVs up to 31 inches. Concrete adds $69, and a paintable cord cover adds $69. COIs and elevator bookings cost nothing extra.
Do you serve all Washington DC apartment neighborhoods?
Yes, from Columbia Heights, Navy Yard and NoMa to Crystal City, Ballston, Rosslyn and Bethesda. Units in buildings without COI paperwork near the Metro often get the TV up the day you call.
Apartment and Condo Installs Around DC
Arlington's Crystal City and Pentagon City towers, Woodbridge garden apartments, Franconia complexes, renters and condo owners make up a large share of our DC-area work.
A 70" and a 55" with surface raceways in Arlington
Two screens in a rental, cables in paintable raceways so nothing is cut into the building's walls. Raceways come off cleanly at move-out, the kind of detail that matters when a security deposit is on the line.
Gaming setup on a swivel arm in Franconia
A 65" on a full-motion arm, a surface raceway, and a longer HDMI cable so the PS5 could sit on a console across the room. Small detail, but it is the difference between a clean setup and a cable stretched tight.
85" with a soundbar in a Woodbridge apartment
A big screen, in-wall wiring and a soundbar mount. In apartments we only open the wall when the tenant has management's approval; here it was cleared, so the cords disappeared completely.
Condo and apartment rules in DC
Many DC and Arlington buildings require a certificate of insurance from contractors and limit work to weekday hours, and some ban in-wall wiring. Check with management before the visit and we will bring the right paperwork and hardware.
DC-Area Apartment Installs
Three TVs in a DC apartment, two on swing arms
A Columbia Heights apartment with three TVs and no in-wall wiring allowed. The two 60-inch sets went on full-motion arms and the 40-inch on a tilting mount in the kitchen.
The technician arrived in Columbia Heights 30 minutes after the call. The building had steel studs, which the scanner and a magnet confirmed. For the full-motion arms, the technician used heavy toggle bolts rated for steel studs and spread each arm across two studs so the load isn't on one point. Each arm was tested at full extension.
Paintable cord covers run from each TV to the outlet. Everything was tested and vacuumed.
A 65" with in-wall wiring and a 45" swing arm
A condo where in-wall wiring was allowed in the living room but not the bedroom. The 65-inch got the in-wall run, and the 45-inch arm got a cord cover.
The technician arrived at the start of the booked window. Both walls were scanned, both mounts went into studs, and both TVs were tested.
The in-wall run in the living room went down a clear stud bay after a scan. The 45-inch arm in the bedroom was set to clear the window frame at full swing.
Both TVs were tested, and the condo was vacuumed.
Customer Reviews
SO GOOD!!!! Fast and so nice- go to these guys for anything TV / wall related!!!!
Great service, install looks great, and quick on completion
Great experience!! Book with them!!
Very nice and respectful.
Stepan, was super nice and great.







