About Our Houston Service
Mounting a TV on brick requires specialized tools and technique, masonry drill bits, the right anchor type, and knowing whether to drill into the brick face or the mortar joints. We mount TVs on brick walls throughout Houston including The Woodlands, Sugar Land, and Katy.
Houston homes have a range of brick types: older The Woodlands row homes with solid brick walls, Sugar Land mid-century bungalows with brick accents, and newer League City construction with brick veneer. Each requires a different anchor approach.
Brick Types We Handle in Houston
- Solid brick walls: load-bearing brick in older Woodlands and Sugar Land homes. Sleeve anchors or through-bolts set into the brick faces carry heavy TVs.
- Brick veneer over wood stud framing: brick veneer over wood framing, common in League City and Friendswood. We find the studs behind the veneer and lag through it into the wood.
- Mortar joint drilling: our bit stays in hard-fired brick and steers clear of the mortar lines. Houston mortar is often soft and sandy, and anchors in mortar loosen over time.
- Painted or sealed brick: paint hides the mortar lines, so we watch the dust color while drilling to stay in solid brick. Common in renovated Katy and Pearland homes.
Pricing in Houston
| Service | Price |
|---|---|
| Brick, stone or concrete wall, 32"–59" TV | from $238 |
| Brick, stone or concrete wall, 60"+ TV | from $258 |
| 60"+ TV with 2 technicians | from $298 |
| Full-motion mount supplied | +$89 |
| Cord cover on masonry | +$69 |
| In-wall routing through masonry | custom quote |
Get an Exact Quote for Your Houston Home
Answer 3 quick questions, we'll text you a price in under 2 minutes.
Call +1 (346) 636-6787Service Areas in Houston
Frequently Asked Questions
Can you mount a TV on a brick wall in Houston?
Yes, on solid brick, brick veneer and painted brick across Houston. We use a hammer drill with a vacuum at the bit and masonry anchors sized for the TV's weight.
Do you drill into the brick or the mortar when mounting a TV in Houston?
Into the brick. Mortar in many Houston houses is soft, and anchors set into it can work loose; the brick face holds much better. We check the dust color while drilling to stay out of the joints.
How much does brick wall TV mounting cost in Houston?
Brick wall mounting is $238 for a 32–59 inch TV and $258 for 60 inches and up: the regular price plus a $69 masonry add-on. Cord covers are $69.
Can you hide wires on a brick wall in Houston?
Usually with a raceway painted to match the brick, since masonry can't be fished. Where a framed wall sits next to the brick, we can drop the cable inside that wall instead.
Do you serve all Houston areas for brick wall TV mounting?
Yes, across Houston: The Woodlands, Sugar Land, Katy, Pearland and League City, plus brick bungalows in the Heights, Montrose lofts and older brick ranches in Meyerland and Bellaire. Same-day brick installs are usually possible.
Brick and Stone Jobs in the Houston Area
Brick veneer fireplaces, stone accent walls and the odd interior brick wall in older homes, masonry turns up across the metro. Recent examples:
50-inch on brick in Richmond
Brick holds a bracket beautifully as long as the anchors go into solid brick, not the mortar joint's weakest edge. A hammer drill, the right masonry bit and sleeve anchors sized for the load, that is the whole recipe.
Swing arm on brick, cables in a raceway, in Porter
A full-motion arm on brick puts real leverage on four anchors, so we used heavier sleeves for the 75". You cannot hide cables inside a brick wall, so they run down in a raceway instead.
Stone fireplace and three more TVs in Seabrook
A 65" above a stone fireplace, two 32" sets and a 50" elsewhere, with four raceway runs. Natural stone is uneven, so the bracket needed shimming to sit flat before the TV went on.
Brick and Stone Jobs in Houston
Swapping a 65" on a brick wall in Bellaire
The old 65-inch came down, a new one went up, and a soundbar was added. The old anchor holes in the brick didn't fit the new bracket, so the technician drilled fresh holes into solid brick beside them, using a hammer drill with a vacuum running.
The technician got to Bellaire about 25 minutes after the call, because he was finishing a job in West University. Masonry sleeve anchors went in, the bracket was leveled, and the soundbar was set on its own mount under the screen. Sound and picture were tested, and the brick dust was cleaned off the floor.
55" on a brick fireplace in Montgomery
An old bracket was removed from the brick first. The new 55-inch went higher, centered over the mantel. The technician checked the surface temperature above the firebox before marking the holes.
This was a scheduled morning visit, and the technician arrived at 9:15 for a 9–11 window. Holes were drilled into the brick faces, not the joints. A fixed mount was anchored and leveled, and the cords were run in a paintable cover down the side of the chimney. Everything was tested and vacuumed.
The mantel was deep, so the technician checked that the bottom of the TV would clear it with room to spare and that the cord cover could run neatly down the side of the brick without crossing the mantel.
The new screen ended up about four inches higher than the old one, which put it out of the hottest air above the firebox. The old anchor holes were filled with mortar-colored patch.
Customer Reviews
Vitalii did a great job!
Evan’s was a quick worker and precise with every measurement. He kept me updated on how long before he made it and was very patient with me being a few minutes behind.
Evan
Evan was quick and efficient! Entire TV mount process took under 20 minutes! Highly recommend 10/10
Evan was quick and efficient! Entire TV mount process took under 20 minutes! Highly recommend 10/10



